ChipKIT UNO 32 12-Port Temp Center Kit

I designed this kit for a friend over at TBCS for his computer mod Honeycomb. It's a shield for the Digilent ChipKIT UNO 32 (will not fit the MAX 32 as the Analog pin layout is different). This shield will allow you to read up to 12 10k temperature sensors and display the readings on a standard 16x2 LCD display that runs off of either 5V or 3.3V. It's completely open-source and all files are available for download! Feel free to download the files (at the bottom of the page) and make your own or contact me if you want bare boards or even an assembled kit! Read more...

Schematics:

Board Layouts:

Images:

Links:

Bill Of Materials (.pdf)

Shield Layout (.brd for CADSoft Eagle)

Shield Schematic (.sch for CADSoft Eagle)

LCD Board Layout (.brd for CADSoft Eagle)

LCD Board Schematic (.sch for CADSoft Eagle)

Code (.pde for the ChipKIT version of the Arduino IDE)

ChipKIT UNO 12-Port Temp Center by Computers And Circuits is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 3.0 Unported License.
Based on a work at http://www.computersandcircuits.com/?q=temp_center.
Permissions beyond the scope of this license may be available at http://www.computersandcircuits.com/?q=temp_center.